NS0-501 Free download
Free Download PassQuick NS0-501 Practice Exams
Preparing for the NS0-501 exam? Searching NS0-501 Braindumps, NS0-501 Test Questions, NS0-501 Practice Exam, NS0-501 Dumps? PassQuick NS0-501 is written to coincide with the real test by the experienced IT experts and specialists. With the complete collection of PassQuick Questions and Answers, PassQuick NS0-501 is high enough to help the candidates to easy pass this exam easily without any other study materials and no need to attend the expensive training class.
Free NS0-501 PDF Download
Download Network Appliance NS0-501 Pdf
Exam : Network Appliance NS0-501
Title : Network Appliance Implementation Engineer-SAN
1. What type of zoning is based on World Wide Port Name?
A. hard
B. port
C. soft
D. WWPN
Answer: C
2. What could a F_Port represent?
A. A Fibre Channel hub’s connection to the FC switch.
B. A storage controller’s connection to the FC switch.
C. An inter-switch link connection between FC switches.
D. An unused port on the FC switch.
Answer: B
3. ACME corporation currently has a NetApp Fibre Channel block-based solution. With limited budget and resources, they want to create a new disaster recovery site that utilizes a NetApp solution. The optimal solution would include ________.
A. SnapMover and Fibre Channel at the Disaster Recovery site for all hosts.
B. SnapMirror and iSCSI at the Disaster Recovery site for all hosts.
C. a combination of Fibre Channel and iSCSI.
D. MetroCluster and NAS.
Answer: B
4. In a FC or IP SAN, what is the proper procedure to obtain a consistent Snapshot of an application’s data?
A. Quiesce Application, Flush Filesystem Buffers, Take Snapshot
B. Flush Filesystem Buffers, Quiesce Application, Take Snapshot
C. Quiesce Application, Take Snapshot
D. Take Snapshot
Answer: A
5. Which command would collect information about the firmware version running on a Cisco 9513 FC switch?
A. version
B. switchshow
C. show switch
D. show version
Answer: D
6. Which is true regarding the use of a shortwave multimode fiber cable at 2Gb?
A. Multimode fiber can be used for MAN connections.
B. Multimode fiber can be used for WAN connections.
C. Multimode fiber can be used for up to 20k.
D. Multimode fiber can be used for up 300 meters.
Answer: D
7. Determine the appropriate FC topology based on the diagram below.
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B
8. Your customer will connect two new servers and two new storage ports to the McData switch. There are only 4 ports available. The customer asks for the best port assignments for availability.
Which two port assignments would you suggest? (Choose two.)
A. HBA 1 -> Port 1, HBA 2 -> Port 2, FA 1 -> Port 4, FA 2 -> Port 3
B. HBA 1 -> Port 1, HBA 2 -> Port 2, FA 1 -> Port 3, FA 2 -> Port 4
C. HBA 1 -> Port 4, HBA 2 -> Port 3, FA 1 -> Port 1, FA 2 -> Port 2
D. HBA 1 -> Port 4, HBA 2 -> Port 3, FA 1 -> Port 2, FA 2 -> Port 1
Answer: AC
9. Select the difference between an iSCSI LUN and a FC LUN.
A. There is no difference.
B. FC LUNs have different serial numbers than iSCSI LUNs.
C. iSCSI LUNs snapshots take longer than FC LUNs snapshots.
D. A FC LUN is bigger and consumes more space than an iSCSI LUN.
Answer: A
10. Which utility on Solaris 10 could be used to collect information about firmware and driver versions for an Emulex LP10000 HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E
11. Which utility on Windows 2003 could be used to collect information about firmware and driver versions for an Emulex LP10000 HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E
12. Which command would collect information about the firmware version running on a Brocade 4100 FC switch?
A. version
B. switchshow
C. show version
D. show switch
Answer: A
13. A customer has a 4-node SUN cluster configuration, and each node has 2 dual-ported HBAs. What is the minimum number of igroups that need be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A
14. Which utility on Solaris 10 would collect information about firmware and driver versions for a Qlogic QLA2340 HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D
15. A Solaris 9 host is not seeing all the expected paths to a LUN, but the storage controller sees all the initiators from the host. What is misconfigured?
A. the zones
B. the portsets
C. the igroups
D. the cabling
Answer: C
16. Identify the SAN topology that provides best performance and scalability.
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B
17. ACME Corporation has five Windows servers that are dual-attached, four Linux servers that are single-attached, and ten dual-attached Solaris servers. ACME wants a highly available architecture.
A FAS3020C with all onboard FC ports connected to the fabric is being proposed.
Determine how many FC ports are required and the fabric layer.
A. single fabric with 38 ports
B. fabrics with 38 ports
C. dual fabrics with 42 ports
D. single fabric with 42 ports
Answer: C
18. Hard zoning is implemented at the ASIC level. (True or False?)
A. True
B. False
Answer: A
19. When zoning by World Wide Node Name (WWNN) is deployed and a host HBA is replaced, no zone changes need to be made. (True or False?)
A. True
B. False
Answer: B
20. What is the approximate capacity overhead of a cloned flexible volume at creation?
A. 200%
B. 100%
C. 50%
D. 0%
Answer: D
Recommended Training about Network Appliance NS0-501 testing Fromat
The following courses are the recommended training for NS0-501 PDF Fromat.
NS0-501 Q & A with Explanations
NS0-501 Audio video download
NS0-501 Study Guide materials
NS0-501 Preparation Labs
NS0-501 paper books
NS0-501 rapidshare 4shared sadikhov links
NS0-501 torrent notes
NS0-501 self testengin
NS0-501 sample print pdf version
Why do you Choose PassQuick NS0-501
Quality and Value for the NS0-501 Exams
PassQuick Practice Exams for Network Appliance Certification NS0-501 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass NS0-501 Exam
If you prepare for NS0-501 exam using our PassQuick testing engine, we guarantee your success in the first attempt. If you do not pass the NS0-501 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
No related posts.
Related posts brought to you by Yet Another Related Posts Plugin.